In-Stock Cabinets in Atlanta, GA
A rental property that needs a functional kitchen this week, or a house flip where the timeline is tight: in-stock cabinets in Atlanta ship in days because they are already built and sitting in a warehouse. Atlanta Cabinet Works carries assembled in-stock lines in a handful of standard finishes and the full range of three-inch-increment widths, ready to measure, order and install without a factory lead time.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
About our in-stock cabinets
The tradeoff for that speed is a narrower set of options: sizes come in fixed three-inch steps with no variations between them, and finishes are limited to a small selection compared with a semi-custom catalog. Filler strips and scribing cover the gaps that fixed sizing leaves at walls and corners. Call for a written quote that lays out the available sizes, finishes and the filler plan for your specific kitchen walls.
Why Atlanta Cabinet Works
How We Work
One conversation in your home, one measure, one written quote, then an install date.
Who in-stock cabinets suit
In-stock cabinets are well matched to projects where the timeline and the budget both point away from a factory order. Rental property kitchens that need to be functional and presentable without a high per-unit cost are the most common application. House flips where the carrying cost of an eight-week wait is significant are another. New construction spec builds where the buyer will likely renovate within a few years also fit the profile.
In-stock also works well for projects where the layout is simple and the walls are close to square. A galley kitchen, a U-shape, or a single-wall kitchen with standard ceiling height and no unusual corners is a layout that in-stock sizing handles without significant filler work. The more complex the layout and the more irregular the walls, the more filler strips are needed and the more the result can look like a compromise.
Homeowners who are planning a longer-term renovation but need the kitchen functional in the near term sometimes use in-stock for a temporary kitchen while the budget for a semi-custom order accumulates. In that scenario the in-stock boxes are treated as a placeholder rather than a permanent installation.
Standard sizes and filler strips
In-stock base cabinets come in widths from 9 to 48 inches in three-inch steps. Common sizes are 9, 12, 15, 18, 21, 24, 27, 30, 33, 36 and 42 inches wide. Standard base cabinet height is 34.5 inches, and standard depth is 24 inches. Wall cabinets come in the same width range and in standard heights of 12, 15, 30, 36 and 42 inches, at 12 inches deep.
Kitchen walls are rarely a multiple of three inches. A wall that measures 109 inches, for example, cannot be filled with catalog sizes alone. Filler strips, which are narrow panels in the same finish as the cabinet doors, fill the remaining space between the last cabinet and the wall. A filler strip at each end of a run is standard practice. Corner cabinets use blind corner bases or lazy susans to handle the turn, and the filler at the adjacent run is sized to clear the door swing.
The fit-and-finish of filler work varies with the skill of the installer and the quality of the wall condition. A wall that is plumb and straight produces a cleaner filler joint than a wall with bow or taper. The site evaluation confirms wall conditions before the order is placed so the filler plan is accurate.
In-stock cabinet cost
In-stock cabinets in Atlanta are the lowest-cost tier of the grade ladder. Installed cost for a full kitchen runs at the low end of the semi-custom range for a comparable layout, and the per-box cost is lower because the factory investment per unit is lower when boxes are produced in volume rather than built to order. The savings over semi-custom are real on larger kitchens and smaller on kitchens with many specialty units, since specialty units are more limited in in-stock lines.
The hardware cost for in-stock boxes is often not included. Hinges, drawer slides and door pulls are typically added to the order separately and affect the total cost. Soft-close hinges and undermount slides are available as aftermarket additions and are specified at the design visit. These are rough estimates, subject to change, and the final price is set in the written quote once the full order is sized.
Ordering and delivery in days
The order process for in-stock cabinets starts with the same design visit and field measure as any cabinet project. The layout is drawn, sizes are assigned to every run, and the filler plan is confirmed. The order is placed against whatever boxes are in stock at the warehouse, and delivery is typically available within a few days of the confirmed order rather than the four-to-eight-week window for semi-custom.
The risk in in-stock ordering is inventory. A specific size or finish that is in stock today may not be available next week. Projects that depend on a particular configuration need to confirm stock levels before the project schedule is set around a specific delivery date. Atlanta Cabinet Works confirms availability with the supplier before placing any order and flags sizes or finishes where stock is low.
Installation follows the same sequence as any cabinet project: wall cabinets first, base cabinets, then specialty units. Filler strips are cut on site to the measured dimensions. The installed result is a functional kitchen ready for countertop templating the following day, without the factory wait of a semi-custom or custom order.
The process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build
Questions
In-Stock Cabinets: Common Questions
What finishes are available in in-stock lines?
Most in-stock lines carry a small selection of finishes: typically a white or off-white painted finish, a medium-stained shaker in a wood tone, and sometimes a gray painted option. The selection is narrower than a semi-custom catalog. If a specific finish or door profile is required and not available in stock, a semi-custom line is the right step up.
Can in-stock cabinets reach the ceiling?
Standard wall cabinet heights top out at 42 inches. A ceiling at the standard 96-inch height leaves a roughly 18-inch gap above 42-inch wall cabinets. Crown molding can close part of that gap, or a second, shorter wall cabinet can be stacked above the first if the design and the wall structure support it. Kitchens with non-standard ceiling heights often need semi-custom or custom wall cabinets to reach the ceiling cleanly.
Do in-stock boxes come with dovetail drawer boxes?
Most in-stock lines use staple-and-glue or dado drawer box construction rather than dovetail joints. Dovetail drawer boxes are a semi-custom and custom feature. For a rental property or a flip, the simpler construction is adequate. For a permanent installation that will receive daily use over many years, the semi-custom or custom construction is more durable.
What is the box construction on in-stock cabinets?
Most in-stock lines use particleboard box construction rather than plywood. Particleboard is adequate in dry conditions but holds fasteners less well than plywood in environments with humidity cycling, which Atlanta experiences seasonally. For a rental kitchen or a temporary installation this is acceptable. For a permanent kitchen in a high-humidity environment, plywood box construction is worth the upgrade to a semi-custom line.
How does the installation differ from semi-custom or custom?
The installation process is the same: wall cabinets first, base cabinets, then specialty units, all shimmed plumb and level. The main difference is that in-stock boxes often require more filler work because they come in fixed three-inch increments rather than the exact dimensions a semi-custom or custom order can be sized to. The filler plan is confirmed at the design visit and cut on site during installation.
Talk to us about in-stock cabinets
Tell us about the room, in Atlanta or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.