Semi-Custom Kitchen Cabinets in Atlanta, GA
A kitchen replacement offers three basic price tiers: in-stock boxes for immediate delivery, semi-custom lines for a wider range of sizes and finishes, and fully custom work for kitchens that fall outside any catalog. Semi-custom kitchen cabinets in Atlanta sit in the middle of that range, letting you adjust widths and choose from a broad finish catalog while the factory assembles the order in four to eight weeks. Atlanta Cabinet Works helps buyers work through what each tier actually delivers before a line is chosen.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
About our semi-custom kitchen cabinets
The modifications available on a semi-custom line are preset by the catalog: widths come in three-inch steps, heights can usually be ordered to ceiling, and finishes run to dozens of options. What stays fixed is the door profile, the interior construction method and the framing choice. Call Atlanta Cabinet Works to go through the exact catalog for your budget so you know the boundaries before the design session starts.
Why Atlanta Cabinet Works
How We Work
One conversation in your home, one measure, one written quote, then an install date.
Modifications a semi-custom line allows
Semi-custom lines are built to order from a published catalog of options. The modifications they allow fall into a few categories. Width adjustments are the most common: where in-stock boxes come only in fixed three-inch increments, semi-custom lines typically cover the same steps but also offer fillers in exact dimensions to fill the remaining space cleanly. Some lines offer one-inch width steps rather than three-inch steps at certain sizes.
Height modifications are common on wall cabinets. Standard wall cabinet heights run 30, 36 or 42 inches; semi-custom lines can order wall cabinets to exact ceiling heights when the ceiling is within the catalog range. This eliminates the dust-collecting gap above wall cabinets in rooms with taller ceilings.
Interior fittings are often available as factory-installed options: pull-out shelves, soft-close hinges and undermount drawer slides, cutlery dividers and peg systems. Ordering these at the factory is more reliable than adding them as aftermarket accessories because the box is built to accept them. Finish options on most semi-custom lines cover painted and stained choices, including on-trend colors and wood species that in-stock lines do not carry.
What stays fixed in the catalog
The door profile is set by the catalog line. A semi-custom line based on a shaker door profile does not offer a raised panel or slab door in the same finish family. If a specific door profile is essential to the design, the catalog selection starts there and the rest of the options follow from whichever lines carry that profile.
Box construction method is set at the factory. A line built on frameless construction does not switch to face-frame construction on request, and vice versa. Frameless construction gives slightly more interior width per box; face-frame construction offers a traditional look and makes scribing to the wall easier. The choice is made when the line is selected, not adjusted per box.
Depth is fixed on most lines. Standard base depth is 24 inches and standard wall depth is 12 inches. Lines that offer a deeper base, such as 27 inches for an island, publish that as a separate option. A depth that falls outside the catalog cannot be ordered; that need pushes the project toward custom work.
Semi-custom cost per linear foot
Semi-custom kitchen cabinets in Atlanta run roughly $150 to $700 per linear foot installed, depending on the line, the door style, the finish and the interior fittings. The low end of that range reflects an entry-level semi-custom line with a painted shaker door, a stained wood species finish and minimal interior fittings. The high end reflects a premium semi-custom line with a custom-painted or specialty-stained finish, inset doors, plywood box construction and factory-installed soft-close hardware throughout.
The number of linear feet is not just the wall run. Each specialty unit, pantry box, tall oven tower and range hood cabinet is counted separately and often costs more per unit than a standard base or wall box. A kitchen with a full pantry run or a dedicated baking station will price out higher per linear foot than a simple galley. All price ranges here are estimates, subject to change, and the final cost is set by the written quote.
Lead times for assembled lines
Semi-custom cabinets are built after the order is placed, not pulled from a warehouse. The factory builds the exact configuration ordered, which is why the lead time is longer than in-stock boxes. Most semi-custom lines run four to eight weeks from confirmed order to delivery. The lead time is confirmed with the supplier before the order is placed, so the project schedule is known before commitments are made to other trades.
The four-to-eight-week window is a factory lead time, not a project timeline. The design visit, layout approval and order placement happen before the clock starts. After delivery, the installation appointment is scheduled. Countertop templating follows the day after cabinets are set. The total calendar from design visit to a functional kitchen, including a granite or quartz countertop, typically runs eight to twelve weeks on a semi-custom project.
Order changes after the factory confirms the order carry delay and sometimes a change fee. Getting the layout, door style and finish confirmed at the design visit before placing the order avoids that situation. The written quote is the point at which everything is locked.
The process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build
Questions
Semi-Custom Kitchen Cabinets: Common Questions
What is the difference between semi-custom and in-stock cabinets?
In-stock cabinets are pre-built and available immediately from a warehouse. They come in fixed sizes, a small selection of finishes, and the same construction throughout. Semi-custom cabinets are built after the order is placed, which allows a wider range of sizes, more finish options, and factory-installed interior fittings. The tradeoff is a four-to-eight-week lead time instead of same-week delivery.
Can I mix semi-custom and in-stock cabinets in the same kitchen?
Mixing lines in a single kitchen is difficult because box depths, face frame styles and door profiles rarely match between lines. The more practical option is to choose a single semi-custom line that covers the full kitchen and use fillers and specialty units from within that line. Atlanta Cabinet Works reviews the layout at the design visit and flags any situation where mixing would cause a visible mismatch.
Do semi-custom cabinets come with soft-close hardware?
Most semi-custom lines offer soft-close hinges and undermount drawer slides as a factory-installed option rather than a standard inclusion. The option is specified at the design stage and added to the order before the factory builds the boxes. Adding soft-close hardware after the fact requires door and drawer adjustments that are more involved than ordering it from the start.
How does framed versus frameless construction affect the layout?
Framed cabinets have a face frame that overlaps the box opening by about three quarters of an inch per side. Frameless cabinets have no face frame, which gives slightly more usable interior width. For most kitchens the difference is minor. Frameless construction is more common in European-style kitchens; framed is more common in traditional American kitchens. The choice is made at the line selection stage since a single semi-custom line uses one construction method throughout.
What finishes does a semi-custom line typically carry?
Most semi-custom lines carry painted finishes in a range of whites, grays and accent colors, plus stained finishes in maple, cherry, oak and sometimes white oak or hickory. Specialty painted colors or stains that fall outside the standard catalog require custom work. Atlanta Cabinet Works pulls the finish catalog for the specific line at the design visit so you see exactly what is available before choosing.
Talk to us about semi-custom kitchen cabinets
Tell us about the room, in Atlanta or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.